Checking Shipment Size and Weight

• If your parcel weighs more than 25 kg, there may be an added fee for heavy or large parcels. For more information, go to Costs and Rates.
• Remember, if it weighs more than 70 kg, your parcel is considered freight. Click here to calculate how much it will cost to ship it.

• First things first – you need to pack your items in a sturdy box. If you don’t have one, you can order supplies online.
• Wrap items separately and use cushioning material. Get packaging tips.
• Seal your box with heavy-duty tape (preferably reinforced), by applying three strips to both the top and bottom of the box, so that the middle seam and the two edge seams are sealed.
• You’ll need to know the dimensions and weight of your box. Keep them handy when you create a shipment.

• You must attach a heavy parcel sticker to all your parcels that weigh more than 25 kg.
• Apply the bright yellow UPS heavy parcel sticker to your parcel to the right of the address label for maximum visibility.
• Write the weight of your parcel in the white area on the label.
• Using highly visible heavy-parcel stickers allows UPS to give your heavy parcels the special attention and handling that they need and deserve. The stickers alert our employees and your customers that special care should be taken to safely handle these parcels.
• You can get heavy parcel stickers by going to our Order Supplies page.

Parcels can be up to 400 centimetres in length and girth combined.

To accurately determine length and girth, use the formula: Length + 2x Width + 2x Height

Remember, the longest side of your parcel will be your length.

Measure irregularly shaped parcels as if they were in a rectangular box. Measure the length, width and height of the theoretical parcel from its extreme points to determine the parcel’s dimensions.

The actual weight is the parcel weight rounded up to the next half kg.

Use a scale to determine the weight of the parcel. Round any fraction of a kg to the next half kg.

Compare the parcel's actual weight to its dimensional weight. The greater of the two is the billable weight and should be used to calculate the rate. For multiple-parcel shipments, total the billable weight of all parcels in the shipment.

Refer to the Determine the Weight and Size section of the Rate and Service Guide.

Dimensional weight reflects parcel density, which is the amount of space a parcel occupies compared to its actual weight. Dimensional weight may apply to all UPS domestic and international parcel services.

Determine the parcel measurement in centimeters. For each measurement, start at the longest point, rounding each measurement to the nearest whole number.

Multiply the parcel length (longest side of the parcel) by the width by the height. The result is the cubic size in centimeters.

Divide the cubic size in centimeters by 5,000. Increase any fraction to the next half kilogram.

Compare the parcel's actual weight to its dimensional weight. The greater of the two is the billable weight and should be used to calculate the rate.

We have freight shipping services to get your heavy shipments exactly where they need to go. Click here to calculate how much it will cost.

Billable weight is the weight used to calculate the rate. The billable weight will be the greater of the dimensional weight, actual weight, and minimum billable weight. The minimum billable shipment weight is 68 kg.

To determine billable weight:

Step 1. Determine actual weight. Actual weight is the weight of the items on the pallet and the weight of the pallet rounded up to the next half kilogram.

• Use a scale to determine the weight. Round any fraction of a kilogram to the next half kilogram.

Step 2. Determine dimensional weight. Dimensional weight reflects pallet density, which is the amount of space a pallet occupies in relation to its actual weight. Dimensional weight may apply to all UPS international parcel services.

• Determine the pallet dimensions in centimetres. For each dimension, measure at the longest point, rounding each measurement to the nearest whole number (e.g., 1.00 to 1.49 will be considered 1, and 1.50 to 1.99 will be considered 2).
• Multiply the pallet length by the width by the height. The result is the cubic size in centimetres.
• For import and export shipments, divide the cubic size by 5,000 to determine the dimensional weight. Increase any fraction to the next half kilogramme.

Step 3. Determine billable weight.

• Compare the pallet's actual weight to its dimensional weight and minimum billable weight. The greater of the three is the billable weight and should be used to calculate the rate. For multiple-pallet shipments, the minimum billable shipment weight is 71 kg.